Elstat ems55advanced Manual page 44

The ems controller then scrolls through the statistics pausing for 20 seconds at each statistic before returning to normal
operation.
The 3-digit display can show values from 000 to 999.
For values of 1000 and above, the display shows the value as a rounded decimal number. For example, 1.1 represents 1100,
1.2 represents 1200, and so on.
display statistic
activity
frequency
average
temperature
compressor cycles
compressor runtime
door
openings
highest
temperature
lowest
temperature
motion counts
ems55advanced and ems55Radvanced / General Use
44 of 84
description
prior to July 2012
Value of the activity frequency
AF parameter.
Possible values are: 0, 1, 2 or 3.
(0 = low, 2= high and 3 = auto-
matic)
Average temperature
measured by the
appliance sensor
during the last 24 hours.
Average number of
compressor cycles per day (24
hour period) during the past 7
days (7 x 24 hour
periods).
Note that the average is
a moving average.
Total number of hours that the
compressor has run since the
ems controller was first
powered up or since the last
full reset.
Average number of door open-
ings per day (24 hour period)
during the past 7 days (7 x 24
hour periods).
Note that the average is
moving average.
Highest temperature
measured by the
appliance sensor
during the past 24 hours.
Lowest temperature
measured by the
appliance sensor during the
last 24 hours.
Average number of motion
counts per day (24 hour period)
during the past 7 days (7 x 24
description
post July 2012
No change
No change
Total number of
compressor cycles since
first powered up or last full
reset
No change
Total number of door
openings since first powered
up or last full reset
No changes
No changes
Total number of motion
counts since first powered
up or last full reset