Table of Contents
Advertisement
7.5
how to view the ems55advanced parameter settings (PS) OFC firmware
View the parameter settings to check the values of the parameters.
View the parameter settings as follows:
Press and hold the set button until PAS is displayed.
1.
2. Enter the button sequence of the password.
Ensure that PS is displayed.
3.
4. Press and hold the
set
Keep the men u button pressed to scroll through the parameter settings.
5.
See "defrost interval (dE)" on page
71
See "defrost duration (dd)" on page
71
See "fan cycle on (FCO)" on page 75
See "fan cycle off (FCF)" on page 75
button to view the parameter name and value alternatively.
See "Celsius or Fahrenheit (CF)
" on page 70
See "set point (SPC or SPF)" on
page 80
See "differential (dIF)" on page
72
See "calibration 1 (CA1)" on
page 69
See "defrost interval (dE)" on
page 71
See "defrost duration (dd)"
on page 71
See "defrost method (dF)" on
page 72
See "defrost termination
method (dtF)" on page 73
ems55advanced and ems55Radvanced / General Use
39 of 84
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ems55advanced and is the answer not in the manual?
Questions and answers
O meu aparelho está desregulado.....como colocar os números q vieram de fábrica nele