Table of Contents
Advertisement
9.7
how to connect the docking cradle
To set up the docking cradle, extract the drivers from the file.
Insert the docking cradle into a spare USB port to install the Windows drivers.
Please note:
Windows Vista and Windows 7 locate and install the drivers automatically. However, on Windows XP, install the drivers manually as
l
described:
See "how to install the drivers on Windows XP" on page 55
l
Finally, define the COM port of the docking cradle.
9.8
how to configure the COM port
Configure the COM port as follows:
1. Start the parameter loader as follows:
Click Parameter Loader in the Start menu.
l
Double-click the file ParameterLoader.exe.
l
2.
Click the Start menu, select Control panel > System Device Manager > Ports (COM & LPT) as shown below.
Check the COM port allocated to the USB docking cradle (USB Serial Port).
3.
For example, in the diagram above, COM3 has been allocated.
ems55advanced and ems55Radvanced / General Use
60 of 84
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ems55advanced and is the answer not in the manual?
Questions and answers
O meu aparelho está desregulado.....como colocar os números q vieram de fábrica nele