Operational Safety; Product Safety - Endress+Hauser Levelflex FMP53 Operating Instructions Manual

Basic safety instructions
10
2.4

Operational safety

Risk of injury!
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
►
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable dangers
If, despite this, modifications are required, consult with Endress+Hauser.
►
Repair
To ensure continued operational safety and reliability,
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Endress+Hauser only.
►
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the hazardous area
(e.g. explosion protection, pressure vessel safety):
Based on the nameplate, check whether the ordered device is permitted for the intended use
►
in the hazardous area.
Observe the specifications in the separate supplementary documentation that is an integral
►
part of these Instructions.
2.5

Product safety

This measuring device is designed in accordance with good engineering practice to meet state-of-
the- art safety requirements, has been tested, and left the factory in a condition in which they are
safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Endress+Hauser confirms this fact by
applying the CE mark.
Levelflex FMP53
Endress+Hauser