Endress+Hauser Levelflex FMP53 Operating Instructions Manual page 150

Description of device parameters (operating menu)
Switch status
Navigation
Prerequisite
Description
Options
Factory setting
Simulation device alarm
Navigation
Description
Options
Factory setting
150
Diagnostics ® Simulation ® Switch status
Only visible for Switch output simulation = On.
Use this parameter to define the switch status for the simulation.
• Open
• Closed
Open
Diagnostics ® Simulation ® Sim. alarm
Use this function to switch the device alarm on and off. In this way, users can verify the correct
adjustment of the current output and the correct function of downstream switching units.
The display alternates between the measured value and a diagnostics message of the "function
check" category (C) while simulation is in progress:
• On
• Off
Off
Levelflex FMP53
Endress+Hauser