Endress+Hauser Levelflex FMP53 Operating Instructions Manual page 130

Description of device parameters (operating menu)
Value 2 display
Navigation
Description
Options
Factory setting
Decimal places 2
Navigation
Prerequisite
Description
Options
Factory setting
Value 3 display
Navigation
130
Setup ® Advanced setup ® Display ® Value 2 display
Use this function to select one of the measured values to be shown on the local display. If several
measured values are displayed at once, the measured value selected here will be the second value
to be displayed. The value is only displayed during normal operation.
The Format display parameter is used to specify how many measured values are displayed
simultaneously and how (® ä 89).
• None
• Level linearized
• Distance
• Current output 1
• Current output 2
• Measured current
• Terminal voltage
• Electronics temperature
For level measurements
Distance
Setup ® Advanced setup ® Display ® Decimal places 2
A measured value is specified in the Value 2 display parameter (® ä 130).
Use this function to specify the number of decimal places for measured value 2. This setting does
not affect the measuring or computational accuracy of the device. The arrow displayed between
the measured value and the unit indicates that the device computes with more digits than are
shown on the local display.
Defines the number of decimal places for the second display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Setup ® Advanced setup ® Display ® Value 3 display
Levelflex FMP53
Endress+Hauser