Installing The Software; Launching The Start Menu - GRAPHTEC CE6000-120AP Setup Manual

Hide thumbs Also See for CE6000-120AP:

Service manual (203 pages)

User manual (227 pages)

User manual (227 pages)

Table Of Contents

Table of Contents

Install the software housed in the attached CD-ROM into the PC that is used.

This section explains how to install the software when using a Windows 7 (32 bit) operating environment.

Note

•

Upon installation, be sure to log on Windows using an account with administrator privileges on your computer.

If you have logged on using a standard user account, an [User Account Control] screen asking you to enter the

administrator account password may appear.

•

Supported OS

This software supports the following OS environments:

Windows 8 (32 bit/64 bit), Windows 7 (32 bit/64 bit), Windows Vista (32 bit/64 bit), Windows XP SP3 (32bit/64bit)

* For the latest OS, please access our web site

1. Launching the Start Menu

After starting up Windows, insert the [USER GUIDE & SOFTWARE CD] provided with the CE6000-120AP into your

computer's CD drive.

The below screen will appear before the Start Menu launches.

Continue with installation in accordance with the following procedures.

The Windows [AutoPlay] screen will appear.

Select [Run MultiSetup.exe] from the Windows [AutoPlay] screen.

* If the [AutoPlay] screen does not appear, open [Explorer] and select the CD drive containing the software to be installed.

Open the CD and double-click on [MultiSetup.exe].

Click [Yes] if you have logged on using an administrator account.

The [Start] will appear.

"Use this menu to install the software you require to use

the CE6000-120AP. First-time users should proceed with installation

by clicking on [Install CE6000-120AP Software]."

Proceed with installation according to your operating environment.