Daikin Altherma EVLQ05+08CA Installer's Reference Manual page 32

5 | About the units and options
Installer reference guide
32
The software and corresponding operating instructions are available on
www.daikineurope.com/support-and-manuals/software-downloads/.
For installation instructions, see the installation manual of the PC cable and
4
"8 Configuration" [ 119].
Heat pump convector (FWXV)
For providing space heating/cooling, it is possible to use heat pump convectors
(FWXV).
For installation instructions, see the installation manual of the heat pump
convectors, and the addendum book for optional equipment.
Solar kit (EKSRPS3)
The solar kit is required to connect the solar application with the domestic hot
water tank.
For installation, see the installation manual of the solar kit and addendum book for
optional equipment.
Domestic hot water tank
The domestic hot water tank can be connected to the indoor unit for providing
domestic hot water. The polypropylene tank is available in 2 types:
▪ EKHWP300B: 300 l.
▪ EKHWP500B: 500 l.
Use the appropriate connection kit for the tank (EKEPHT3H), as described in the
addendum book for optional equipment.
Connection kit for the tank (EKEPHT3H)
Use the connection kit to connect the domestic hot water tank to the indoor unit.
For installation instructions, see the installation manual of the connection kit.
Drain pan kit (EKHYDP1)
The drain pan kit is required for heating/cooling units. It does NOT have to be used
with heating only units.
For installation instructions, see the installation manual of the drain pan kit.
Mounting kit (EKHYMNT1A, EKHYMNT2A, EKHYMNT3A)
Mounting fixture for easy installation of the hybrid system (heat pump module +
gas boiler module). For the selection of the correct kit, see the combination table.
For installation instructions, see the installation manual of the mounting kit.
Filling loop kit (EKFL1A)
Filling loop for easy filling of the water circuit. This kit can only be used in
combination with mounting kit EKHYMNT1A.
For installation instructions, see the installation manual of the filling loop kit.
Valve kit (EKVK1A, EKVK2A, EKVK3A)
A set of valves for the easy connection of the field piping. For the connection of the
correct kit, see the combination table.
For installation instructions, see the installation manual of the valve kit.
EVLQ05+08CAV3 + EHYHBH05AF + EHYHBH/X08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
http://
4P355634-1F – 2020.10