Figure 5.14 License Key - Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining

Chapter 5 Servicing the Tape Library
5.10 Adding a New License Key

Figure 5.14 License key

4
Use the Next button [
key (alphabetic or numeric character). Press
back.
5
If the license key is complete, choose
After activation of the license key a reboot is requested. You have 3 different possibilities to start the reboot:
• Reboot via OCP.
• Power cycle the storage system.
• Reboot via RMU (see
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
] and the Previous button [
▼
Activate
Figure 5.18).
98
Copyright 2018 FUJITSU LIMITED
] to choose the requested digit for the
▲
Enter
to move to the next digit or
.
Cancel
to get
End of procedure
P3AM-5392-07ENZ0