Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
3.5.8.4
Rebooting the Library
Some options of the RMU take the library offline. This inactive mode can interfere with host-based
application software, causing data loss. Ensure that the library is idle before attempting to perform any
remote operations that will take the library offline.
This page is used to perform a library reboot. There is a default time delay when the Web page refreshes itself.
This time should be sufficient to reload the page. However, during a reboot, the connection to the library may
be lost. If the connection is lost, the user will have to reload the page manually.
Figure 3.39 ETERNUS LT40 S2: Service, Reboot page
3.5.8.5
Viewing Library Logs
This page allows the user to view the library logs after entering the following:
•
Log Type
•
Total Number of Entries
•
Start Entry
•
Number of Entries per Page
•
Update
•
Dump Log
•
Save Service Dump
•
Email Service Dump
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
69
Copyright 2018 FUJITSU LIMITED
P3AM-5392-07ENZ0