Connecting; Connection Recommendations And Additional Remarks - Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining

Hide thumbs Also See for ETERNUS LT40 S2:
Table of Contents

Advertisement

Chapter 2 Installing the Tape Library

2.6 Connecting

2.6
Connecting
2.6.1

Connection Recommendations and Additional Remarks

The effectively achievable data throughput of tape drives depends on a multiplicity of factors. These primarily
are:
Specified data throughput on the system bus (e.g. the PCI bus)
Number of host bus adapters (controllers) on the system bus
Origin of data to be stored (e.g. RAID system, single hard disk drives)
Transmission type and speed of the data to be stored (e.g. Ethernet)
Number of devices at the host bus adapter (controller)
Sequential or parallel operation of the tape drives
Compressed or uncompressed operation of the tape drives
2.6.1.1
FC
FC allows for an active intelligent interconnection scheme, called a Fabric, to connect devices. Everything
between the ports on FC is called the Fabric. The Fabric is most often a switch or series of switches that takes
the responsibility for routing.
2.6.1.2
SAS
SAS features
Serial data transfer to and from storage devices as disk and tape drives
4 SAS channels per SAS HBA port (typical, not mandatory) for a maximum of 4 storage devices per HBA
port
Unique identifying of a SAS drive by its WWN (World Wide Name) or WWID (World Wide Identifier)
Host Bus Adapter
The HBA has to meet following requirements:
External SAS connector
Multiple LUN support (most SAS RAID controllers do not support multiple LUNs). Consult your sales
representative or a certified service engineer for compatibility of HBA, library and your server.
SAS Cable
The SAS signal cable supplied with the ETERNUS LT40 S2 has at its drive side 2 connectors for connecting a
maximum of 2 SAS drives. Connect the plug marked "P1a" to the lower drive. Connect the plug marked
"P1b" to the upper drive, if installed.
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
32
Copyright 2018 FUJITSU LIMITED
P3AM-5392-07ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus lt60 s2

Table of Contents