Chapter 3 Operating the Tape Library
3.4 Magazines
Figure 3.6 ETERNUS LT40 S2: Slot numbering right magazine
Figure 3.7 ETERNUS LT60 S2: Slot numbering right magazine
Table 3.3
Slot numbering, right magazine
No.
25-36
Procedure
1
Unlock the magazines and remove it from the Library
•
Use the OCP, see section
•
use the RMU, see section
2
Insert cartridge in the magazines.
3
Put the magazines back to the tape Library. Pull lightly on the magazines to check that they
are locked.
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Description
Slot
"5.7 Removing and Replacing a Magazine Using the OCP" (page
"5.8 Removing and Replacing a Magazine Using the RMU" (page 93)
Copyright 2018 FUJITSU LIMITED
49
92), or
End of procedure
P3AM-5392-07ENZ0