FULTON Endura EDR 750 Nstallation, Operation And Maintenance Manual page 66

SECTION 3
EDR-PURE-IOM-210617
A listing and functional description of each of the graphical icons found witrhin
the touchscreen menus is provided below in Table 8.
TABLE 8 - GRAPHICAL ICON REFERENCE MENU
Button
Tender No. MET21-117
Questions? Please Contact Your Local Manufacturer's Representative
Function
Returns to the parent category.
Tap to display information based
on the screen currently selected.
Green: No alarm condition. Tap to
see Alarm History.
Yellow: Warning or Soft Alarm
active. Tap to see Alarm History.
Red: Alarm or Lock-Out active. Tap
to see Alarm History.
Green: Maintenance Inactive. Tap
to go to the Maintenance screen.
Yellow: Time For Service - Tap to go
to the Maintenance screen.
Green: Locked - Some screens may
not be accessible as confi gured
by the boiler plant administrator.
Tap the icon and enter the
administrative password to unlock.
Yellow: Unlocked - Screens locked
by the boiler plant administrator
are now accessible. Tap the icon
again to lock. The screen will
automatically re-lock after 1-10
minutes (user adjustable).
Green: Lead/Lag Network Active.
Tap to enter Ethernet/IP Status.
Red: Lead/Lag Network
Communication Lost or
Recovering. Tap to enter Ethernet/
IP Status.
Gray: Lead/Lag Network Inactive.
Tap to enter Ethernet/IP Status.
Design & Build RFP: Gas Heating Upgrade
Replacement in Dartmouth
OPERATION
!
WARNING
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional/professional codes and
regulations.
Non-Fulton product information is for
reference purposes only. No Fulton
document may substitute for full
review of documentation available
from the component manufacturer.
4
CAUTION
A temperature exceeding 120°F**
(48 C) in the boiler room may cause
premature failure of electrical
components. Provisions should
be made to maintain an ambient
temperature of 120°F** (48 C) or less
(the panel box interior should not
exceed 125°F** [51 C]).
**Pumps, PLC or ModSync panels may
require lower ambient temperatures or
additional cooling.
Addendum #5 Page 66 of 105
3-13