Replacing The Hard Drive - GeoVision GV-Tower System V2 User Manual

3.7 Replacing the Hard Drive

You can replace the hard drive without shutting down the GV-Tower DVR/NVR/VMS System
V2.
1. Do not turn off the power before you replace the hard drive.
2. Push the release latch. The drawer handle pops up.
3. Lift the handle, pull out the drawer slightly and wait until the hard drive spins down.
4. Pull out the drawer completely, remove the hard drive, and then mount a new one.
5. Put the drawer back in the drive bay.
6. Push the release latch until it locks.
30