Table of Contents
Advertisement
8. Click the Up button on the toolbar, go to the system folder and locate DMPOS.exe.
Figure 3-44
9. Double-click DMPOS.exe. The Set Application Function Position dialog box appears.
10. In the Screen Setup tab, select TwinView from the Displayer Mode drop-down list.
11. To define the live view monitor, in the MultiCam tab, select Monitor 1 from the Select
Monitor drop-down list.
12. Click the desired application tab to move the application to another monitor. In this case,
ViewLog is used as an example.
13. To define the playback monitor, in the ViewLog tab, select Monitor 2 from the Select
Monitor drop-down list.
14. Click the OK button.
15. Exit and re-start the system. The live view should appear on monitor 1.
16. Click the ViewLog button on the main screen and select Video/Audio Log from the
menu. The ViewLog player should appear on monitor 2.
38
Figure 3-45
Advertisement
Table of Contents
