GeoVision GV-Tower System V2 User Manual page 16

4. Using the supplied LFH Audio and Video cable, connect the yellow ends to the cameras,
and the red ends to the microphones.
5. Using the RJ-45 cable, connect one end to the Ethernet port and the other end to Network.
6. Connect the mouse and keyboard to a USB port (either USB2.0 or USB3.0 port).
Once the above hardware is properly connected, press the Power button on the front panel to
start the system. It takes about 1 minute for startup. The system should load automatically and
display cameras in the main screen.
10