General Specifications - Agilent Technologies U1701B User's And Service Manual

General Specifications

Parameter
Power Supply
Display
Function
Measuring rate
Battery type
Power consumption
Battery life
Operating temperature
Storage temperature
Storage humidity
Relative Humidity (R.H.)
Temperature coefficient
Low battery indicator
Weight
Dimension (W x L x H)
Safety
Warranty
U1701B User's and Service Guide
Specifications and Characteristics
U1701B
Single standard 9 V battery (Alkaline)
(Power adaptor is available as optional accessories)
4 ½-digit liquid crystal display (LCD) with maximum reading of
11,000 counts and automatic polarity indication
• Capacitance measurement by DC charge and discharge method
• Visible and audible Tolerance mode assists you to sort the
capacitor
• Min/Max/Average, Data Hold with Manual or Auto Trigger and
Relative modes
• Comparison mode with 25 sets of HI/LO limits can be selected
• backlight display for easy reading in the dark
• One-year calibration cycle suggested
~5 times/s for capacitance <100 µF (Typical)
Alkaline: ANSI/NEDA: 1604A / IEC: 6LR61
5.6 mA (Battery operation)
~80 hours without backlight based on new alkaline
0 °C to 50 °C
–20 °C to 60 °C
0 – 80% R.H. non condensing
80% R.H.
0.1 * (Specified Accuracy)/ °C (from 0 °C to 18 °C or 28 °C to 50 °C)
will appear when the voltage drops below ~ 6.0 V
320 g
87 mm x 184 mm x 41 mm
Designed in compliance with IEC 61010-1 for Pollution Degree 2
Please refer to http://www.agilent.com/go/warranty_terms
• Three years for the product
• Three months for the product's standard accessories, unless
otherwise specified
Please take note that for the product, the warranty does not cover:
• Damage from contamination
• Normal wear and tear of mechanical components
• Manuals and standard disposable batteries
5
57