Relative (Zero) - Agilent Technologies U1701B User's And Service Manual

Relative (Zero)

The relative function subtracts a stored value from the present
measurement and displays the result on the meter.
1 Press REL key momentarily to set the relative mode. This will set the
2 The relative mode can be set at auto or manual range, but not when an
3 Press REL key momentarily to set the relative mode again.
4 With small capacitance measurement, the display will show a non- zero
5 Press and hold REL key for more than 1 s to quit relative mode.
U1701B User's and Service Guide
display to zero and store the displayed reading as a reference value.
The REL annunciator will be displayed.
overload has occurred.
value due to the presence of alligator clip leads. Use the relative
function to Zero- Adjust the display.
Features and Functions 2
15