Setting Brightness Level Of The Backlight For On State - Agilent Technologies U1701B User's And Service Manual

3 Default Setting Configurations

Setting Brightness Level of the Backlight for ON State

This option is used to set the brightness level for the backlight during ON
state. It is used to set brightness after the backlight is turned on. It can be
set from oFF~09. When you turn on the backlight during normal operation,
press SET key once to increase one level. The adjusting range is from
default to 09 then back to default settings. For example, if the brightness
level is set to 05, press SET key to increase the level from 05 until 09 then
back to 05 after the backlight is turned on as normal operation. If the
default is set to 09, there will be no changes when the SET key is pressed.
Figure 3-11 Brightness level for ON state
46 U1701B User's and Service Guide