Part 1 - Metro DataVac M1 User Manual

M1 – M3 Display units

7.1.1. Part 1

Choice of the calculation formula:
 C(1)
 C(2)
 C(1) + C(2)
 C(1) - C(2)
 -C(1)
 -C(2)
 -C(1)+C(2)
 Taper
« C » means « Channel »
It is possible to give a coefficient for each probe
from the menu
Static = direct reading or
dynamic : Max, Min, Max-
Min, Average or Median
For measuring internal or
external diameters. It defines the
indicators colour, and gives
information to the user if the part
can be used again.
Page 33