Exiting The Software; Options; Barcode Settings - 3DHISTECH Pannoramic 250 FLASH User Manual

1.14 sp1
Hide thumbs Also See for Pannoramic 250 FLASH:
Table of Contents

Advertisement

Pannoramic 250 FLASH 1.14 SP1 User's Guide
The camera changer changes the cameras according to the settings in the Microscope Settings
options depending on the selected scan modes. It changes to the camera defined for Brightfield
scanning if Brightfield scan mode is selected, whereas it changes to the camera defined for
fluorescent scanning if Fluorescent scan mode is selected.
It is recommended to use specimens with identical staining for a given
batch of magazines in Automatic mode.

4.1.2 Exiting the software

To exit the software, click X in the title bar. This turns Mode selection window active again. When
exiting Manual mode, it automatically unloads the slide. When closing the Mode selection window, it
automatically unloads magazine. Scanning process ends with the slide out.

4.2 Options

The Options menu can be activated from the main menu of the Mode selection window.

4.2.1 Barcode Settings

March 30, 2011
Note:
Figure 16 – Options menu
Figure 17 – Barcode settings
3DHISTECH Ltd.
4 Software Description
29(130)

Advertisement

Table of Contents
loading

Table of Contents