3DHISTECH Pannoramic 250 FLASH User Manual page 74

Pannoramic 250 FLASH 1.14 SP1 User's Guide
The Routine work tab provides basic digitization functions. Some features of this tab differs from
product to product, these are described in the forthcoming sections.
To insert and remove slides
To move the lowest magazine in the input stack to the loading position click
•
To move the magazine into the output stack, click
•
To move a selected slide from its magazine to the specimen holder either enter its position
•
number to the Current slide field and click
To return the slide to its magazine, click
•
To move all magazines to the output stack, click
•
To access the Scan Options window, click
•
These settings are only applicable if you do not use profiles. If you use
profiles, the profile settings are used.
Scanning Mode
Full automatic: focus and exposure time are automatically determined by the software
•
User controlled: you can define focus and exposure time manually.
•
The selection of scanning mode influences the number of options on the Focus tab.
To administer profiles, use the Scan Profiles field.
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click Save.
•
To select an existing profile from the selection menu, click Load.
•
You can delete the current profile by clicking Delete.
•
March 30, 2011
Note:
3DHISTECH Ltd.
.
.
.
.
.
4 Software Description
.
74(130)