3DHISTECH Pannoramic 250 FLASH User Manual page 30

Pannoramic 250 FLASH 1.14 SP1 User's Guide
Before starting the control software, you have to set the barcode settings here. By predefining the
barcode type, foreground color (color of the barcode), and other settings, you enable the Read
Barcode option when using the control software.
You can only scan the barcode type that you have previously set. If you
want to read several barcode types, you always have to set the current
barcode type before reading it.
Functions
To move the lowest magazine in the input stack to the loading position click
•
To move the magazine into the output stack, click
•
To move a selected slide from its magazine to the specimen holder either enter its position
•
number to the Current slide field and click
To return the slide to its magazine, click
•
To move all magazines to the output stack, click
•
To display an image of the barcode area, click
area by dragging the edges of the green square.
To check whether the barcode reading settings are correct, display the barcode digits in the Barcode
field by clicking
If you did not set the barcode type correctly, or there is no barcode in
the barcode area, the software will display the following error
message: "Barcode detection unsuccessful!" There might be no
barcode present.
March 30, 2011
Note:
.
Note:
3DHISTECH Ltd.
.
.
.
.
. You can redefine the barcode reading
4 Software Description
.
30(130)