3DHISTECH Pannoramic 250 FLASH User Manual page 67

Pannoramic 250 FLASH 1.14 SP1 User's Guide
4. Generate name if no name was defined.
By choosing this option, a name is generated automatically in the following format if no
name was defined and there is no barcode:
<magazine number>M<slide position>
The number before M represents the magazine number. The number after M represents the
slide position. In this example, the name indicates a slide in magazine 1, position 10.
You can also define names for the slides in the table below, by entering names into the
column Names / Barcodes. You can also define profiles in the selection boxes in column
Profiles if you intend to use different profiles for slides.
You can save the entered names and assigned profiles by clicking
saved in a CSV format:
You can export this information into Excel where you can change the data and save it again
in CSV format.
You can import previously saved names and assigned profiles by clicking
You can delete all entries from the table by clicking
March 30, 2011
Current Profile is the profile loaded in Routine Work / Scan Profiles.
1;<slide position>,<slide name>,<profile name>
. You can define a name before saving. The information will be
.
3DHISTECH Ltd.
4 Software Description
(for example, )
1M10
.
67(130)