3DHISTECH Pannoramic 250 FLASH User Manual page 126

Pannoramic 250 FLASH 1.14 SP1 User's Guide
Operating data
Intended site
Electrical protection class
Internal protection degree
Electrical safety
Over-voltage category
Radio interference suppression
Noise immunity
Base unit input voltage
Power consumption of the complete device
Light sources
Halogen lamp (transmitted light operation)
Average service life of halogen lamp
Lamp module for HXP 120 (fluorescent option)
Average service life of Mercury short arc reflector lamp
Lumencor light source
Average service life of the Lumencore's light source
This User's Guide describes HXP 120. Besides, the X-Cite 120 illuminator may also be used.
Slide identification
Slides are identified by preview camera (VRmagic VRmC-8+ PRO): Barcode area is saved as image and
label is interpreted as a character string, with capability for interpretation of the following types of 1D
and 2D barcodes:
Interleaved 2 of 5
•
Code39 (ASCII encoding)
•
Code93 (ASCII encoding)
•
Code128 (UCC/EAN128) (ASCII encoding)
•
March 30, 2011
closed room facilities
I
IP 20
in compliance with DIN EN 61010-1:2001, DIN EN 61010-2-
101:2002 (IEC 61010-1:2001, IEC 61010-2-101:2002)
II
in accordance with EN 55011 class B
in accordance with EN 61326-2-6:2005
100-240V AC
53 VA
Precision-Aligned Pulsed Xenon Light Source
2 x 10^9 flashes
120 W
2000h
SPECTRA 7
10 000 h
3DHISTECH Ltd.
Technical Data
126(130)