Pannoramic 250 FLASH 1.14 SP1 User's Guide
TMA tool
TMA tool is used for selecting TMA spots on TMA slides. You can set the selection settings
on the following four tabs:
Select tab
•
•
•
Block tab
March 30, 2011
Figure 34 – TMA tool: Select
To create a new TMA object, click New.
To select an existing TMA object, click on the object name. The selected object
name will highlight.
To delete an existing TMA object, click Delete.
Figure 35 – TMA tool: Block
3DHISTECH Ltd.
4 Software Description
53(130)