3DHISTECH Pannoramic 250 FLASH User Manual page 77

Pannoramic 250 FLASH 1.14 SP1 User's Guide
Extended Focus
This is the same as in Brightfield mode, but you can set the extended focus for each
channel separately.
Number of focus levels (displayed under EL in the Filter Selection frame).
Focus step size (one step = 0.4 μm) (displayed under ES in the Filter Selection frame).
For more information about Extended Focus, see section 4.3.5 Focus tab.
Digital Gain
This is camera-dependent, only working with AxioCam MRm Rev 3
camera (Index range 0-4).
Enter the Index value by entering it in the box or by selecting the value with the arrow
buttons.
If you raise the Index value, the exposition time is halved by every step, and the image
becomes noisier.
Fluorescent Compensation
Use saved compensation image. To create compensation image, see section 4.2.2
Image Compensation / Fluorescent.
To move between the filters, click Previous Filter or Next Filter.
March 30, 2011
Note:
3DHISTECH Ltd.
4 Software Description
77(130)