3DHISTECH Pannoramic 250 FLASH User Manual page 86

Pannoramic 250 FLASH 1.14 SP1 User's Guide
Live
You can display a live image of the current specimen in the Live image display field by
clicking
It will work only if you have selected an area in the preview image with the Position sample.
This option has no effect on a running digitization process where no live image is displayed.
To display a live image during scanning, select Show images during scanning on the Service
tab.
If you have selected Full automatic mode on the Routine work tab, the Manual Focus and
Manual Exposure frames are not displayed here.
Filters
Select the filter you want to display the live image with from the Filters selection box. The
selected filter will be rotated into position only after displaying the Live image by clicking
You can display the Filter properties window by clicking
see section 4.5.1 Routine work tab).
After 10 seconds, an empty position is rotated into position instead of
the filter. However, the last snapshot is still displayed.
Exposure
You can automatically detect the appropriate exposure time by clicking
also enter the exposure time manually by entering it into the Exp. Time field.
Digital Gain
This is camera-dependent, only working with AxioCam MRm Rev
3camera (Index range 0-4).
You can enter the Index value by entering it in the box or by selecting the value with the
arrow buttons.
March 30, 2011
.
.
Note:
Note:
3DHISTECH Ltd.
4 Software Description
(for more information,
. You can
86(130)