3DHISTECH Pannoramic 250 FLASH User Manual page 91

Pannoramic 250 FLASH 1.14 SP1 User's Guide
To insert and remove slides
If you do not want to load all the slides, you can specify the first and last slide to be loaded in the
Scan Range by entering the appropriate slide numbers in the selection boxes of First slide and Last
slide.
To move all magazines to the output stack, click
magazines from the input stack before you click this button.
You also find the
recommended to go through all the settings before clicking it.
Scan Range
You can select a range of slides to be scanned here by entering the first and last slides in the
selection boxes.
To administer profiles, use the Scan Profiles field.
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click Save.
•
To select an existing profile from the selection menu, click Load.
•
You can delete the current profile by clicking Delete.
•
To access the Scan Options window, click
•
These settings are only applicable if you do not use profiles. If you use
profiles, the settings stored in them are used. The used profile name is
indicated at the bottom left of the main window.
For more information, see section 4.5.2 Scan Options window.
Filter Settings
Focus channel – Choose a filter that you want to focus with. It is recommended to choose a
•
filter that is related to the staining that stained the most of the specimen, or where the
exposition time is low. You can choose from filters that you have previously selected in the
Filter Selection field.
March 30, 2011
button on this tab, that you can start scanning with, but it is
Note:
3DHISTECH Ltd.
. You can save time if you remove all
.
4 Software Description
91(130)