3DHISTECH Pannoramic 250 FLASH User Manual page 93

Pannoramic 250 FLASH 1.14 SP1 User's Guide
Filter name
The name of the filter is displayed here.
Exposure Settings
Exposure time – You can set the fix exposition time here. By selecting the Auto button, the
exposition time is set to
fix position is set, the Exposure time weight value is not valid.
You can set the Exposure time weight (%) here (displayed under TW in the Filter Selection
frame).
In full automatic mode, the system automatically calculates the exposition time to the given
channel. You can increase / decrease this amount here in a range of 50%-200%.
Extended Focus
This is the same as in Brightfield mode, but you can set the extended focus for each channel
separately.
March 30, 2011
Figure 58 – Filter properties window
(the exposition time is calculated by the software). If the
<AUTO>
3DHISTECH Ltd.
4 Software Description
93(130)