3DHISTECH Pannoramic 250 FLASH User Manual page 63

Pannoramic 250 FLASH 1.14 SP1 User's Guide
To save the current profile, click Save.
•
To select an existing profile from the selection menu, click Load.
•
You can delete the current profile by clicking Delete.
•
The Objective position field sets the objective changer to the appropriate position.
To set the objectives, see section 4.2.2 Microscope Settings / Base Settings.
Optovar position field
You can select an Optovar for digitizing purposes.
To access the Scan Options window, click
These settings are only applicable if you do not use profiles. If you use
profiles, the settings stored in them are used. The used profile name is
indicated at the bottom left of the main window.
For more information, see section 4.3.2 Scan Options window.
March 30, 2011
Note:
3DHISTECH Ltd.
.
4 Software Description
63(130)