Software Description; Starting / Exiting Pannoramic Scanner Software; Starting The Software - 3DHISTECH Pannoramic 250 FLASH User Manual

Pannoramic 250 FLASH 1.14 SP1 User's Guide

4 Software Description

4.1 Starting / Exiting Pannoramic Scanner Software

4.1.1 Starting the software

For the scanning software you can choose from different scanning modes at the startup of the
program.
1. To start the program, double-click on the program icon on the desktop or start it from
Start \ Program Files \ 3DHISTECH \ Pannoramic Scanner
2. During start-up, all motors, the preview camera and the scan camera are initialized. After
successful initialization, the program displays a Mode selection window.
The selection window displays two Brightfield and Fluorescent scan modes:
•
•
March 30, 2011
Figure 15 – Mode selection window
Automatic
for digitizing multiple slides
•
Manual
for digitizing individual slides
•
where contrast ratio is critical due to specimen staining and where ideal
•
parameters need to be determined for subsequent use in Automatic mode
if profiles need to be defined for the Automatic mode
•
3DHISTECH Ltd.
4 Software Description
28(130)