Turn Lamp On - Gilson VERITY 1741 User Manual

Turn Lamp On

To use TRILUTIoN Lc to turn the lamp(s) on:
NOTE
The detector requires a 15–30 minute warm-up period to achieve a stable baseline.
1. create a TRILUTIoN Lc method with the detector in the configuration.
a. Select Scan. The software searches for the detector.
b. From the available Instruments window, drag and then drop the detector in the
workspace.
2. on the Control tab, drag and then drop the turn lamp On task into the control workspace.
3. Save the method, and then select run. The application run window appears.
4. on the application run window, select the method name from the Method Configuration
drop-down list and then select
Manual
Control
icon
Figure 14
Application Run Window
5. Select the Manual Control icon. The Manual Control window appears.
6. Tasks are filtered by instrument name. Drag and then drop the turn lamp On task into the
workspace. Select OK.
turn lamp On
task
Figure 15
Turn Lamp On Task
run on the Manual Control window.
7. Select
The instrument is ready for operation.
.
run
VERITY® 1741 UV-VIS DETEcToR
Method
Configuration
| USER'S GUIDE 21