Customer Service - Gilson VERITY 1741 User Manual

Uv-vis detector
Table of Contents

Advertisement

SPECIFICATION
Typical Spectral Half-Width
Digital Output
Output Signal
Ranges of Four Adjustable 1 V
Analog Outputs
Fuse
Power Requirements
Power Input
Environmental Conditions
Safety and Compliance
Dimensions (W x H x D)
Weight

Customer Service

Gilson, Inc. and its worldwide network of authorized representatives provide customers with
the following types of assistance: sales, technical support, applications, and instrument repair.
If you need assistance, please contact your local Gilson representative. Specific contact
information can be found at www.gilson.com. To help us serve you quickly and efficiently, please
refer to Before Calling Us on page 32.
10
INTRoDUcTIoN
DEFINITION OR VALUE
10 nm
1 V/AU
Four wavelength (channels) or scan with speed up to 20 Hz with step of 1 nm
5, 2, 1, 0.5, 0.2, 0.1 AU/V
T2.5A H 250V
Voltage: 100–240 V AC
Frequency: 50/60 Hz
100 VA
Indoor use only
Altitude: up to 2000m
Temperature: 5°C–40°C
Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing
linearly to 50% relative humidity at 40°C
Voltage fluctuations: up to ± 10% of nominal voltage
Overvoltage category I
Pollution degree 2
The detector has been certified to safety standards specified for Canada, Europe,
and the United States. Refer to the instrument rear panel label and the Declaration
of Conformity document for the current standards to which the instrument has
been tested.
28.5 cm x 14.9 cm x 50 cm (11.2 x 5.9 x 19.7 in.)
7.5 kg (16.5 lb.)
|
VERITY® 1741 UV-VIS DETEcToR

Advertisement

Table of Contents
loading

Table of Contents