Boards
The printed circuits information of the main board, display module, communication module, and
analog output module is displayed.
MAin BOARd
Bn - board name, HW - board version, FW - firmware version, Un - board identification number.
diSpLAY MOdULe
Bn - board name, HW - board version, FW - firmware version, Un - board identification number.
COMMUniCATiOn MOdULe
Bn - board name, HW - board version, FW - firmware version, Un - board identification number.
AnALOG OUTpUTS MOdULe
Bn - board name, HW - board version, cD - calibration date.
Ethernet
Displays actual setting of Ethernet, IP (IP address), MASK (subnet mask), GATE (Default gateway)
and MAc (Unique hardware address) address of the detector.
User Text
Default is empty. The user may input supplementary information about the detector when using
software (location in the laboratory, for example). USER TEXT is then a part of the protocol.
Lamps
Shows detailed information about light sources:
deUTeRiUM (d2)
TYPE- lamp type, TIME- total operating hours of the lamp, in parenthesis is actual time from last
lamp ignition.
TUnGSTen (W)
TYPE- tungsten lamp type, TIME- total operating hours of the lamp, in parenthesis is actual time
from last lamp ignition.
FRonT PAnEl conTRol
| USER'S GUIDE
49