Gilson VERITY 1741 User Manual page 23

Input/Output Connections
The VERITY 1741 Detector has an interface for connection to external
devices. The interface has two universal inputs (DIn1 and DIn2) and
two universal outputs (DoUT1 and DoUT2).
If input/output connections will be used, locate the terminal block
connector provided with the detector and make the connection to
the port labeled InTERFAcE.
For more information about making the connections and using the
inputs and outputs, refer to IO Config on page 45.
Analog Outputs
The detector has four independent analog outputs with cinch
connectors. on the rear side of the detector they are marked as
AnALoG oUT and letters A to D.
Plug the supplied analog output cable into the cinch connector
for connection to a data collecting device. Additional cables are
available to be ordered.
For more information about making the connection and using the
analog outputs, refer to Analog Outputs on page 48.
Power Cord Connection
Use the power cord to connect the detector to a power source. Plug
the power supply cord into the instrument socket on the detector
rear panel.
VERITY® 1741 UV-VIS DETEcToR | USER'S GUIDE 17