Working With The Menu; Parameters - Gilson VERITY 1741 User Manual

Working with the Menu

The menu screen enables setting all parameters and functions of the detector, its diagnostics,
and service. The main menu is accessed by pressing the MenU key. navigate the menu using the
arrow keys, enTeR key, and eSC key. Press the MenU key to exit the current screen.
Figure 18
Menu Flow Diagram

Parameters

The basic parameters of the detector can be set here.
Wavelengths
Set the wavelength for each measurement channel and the scan range (ScAn START and
ScAn EnD).
SETTING DESCRIPTION
CHANNEL (A-D) The wavelength of the measurement channel. The default value is 254 nm.
The value at which scanning begins. Set the wavelength in the range of 200–800 nm. The
SCAN START
default range is 200–780 nm.
The value at which scanning ends. Set the wavelength in the range of 200–800 nm. The default
SCAN STOP
range is 220–800 nm.
Wavelength Settings
FRonT PAnEl conTRol | USER'S GUIDE 41