Power Connection - Foxtech SurePulse VS User Manual

2.1.2 DLS module Connection
The Type-C interface of the DLS cable is first inserted into the
CAM port of the DLS module, and the other end is connected with the
camera COMM cable. For details, please refer to DLS 6.2.2 interface
section.
DLS measuring the ambient light of the same wavelength as the
six channels of the camera and the position, attitude information of
the whole machine, the collected results are recorded in the
metadata of the captured image.
Please complete the DLS module connection before powering on the camera,
if not it may cause damage to the DLS module.
2.1.3 Power Cable Connection
MS600V2 Universal Multi-Spectral
Camera User's Manual
Warning
4