Overlap Trigger Mode - Foxtech SurePulse VS User Manual

3.3.2 Overlap Trigger Mode

1) Select "overlap rate trigger " in automatic capture mode drop-
down menu ;
2) Enter the target flight altitude;
3) Enter the target flight velocity value;
4) Sets the course overlap rate of the two triggered images in drop-
down menu ;
5) Save confirmation after setting;
6) Start triggering.
According to the pre-flight situation, the user can modify the default
value of the flight speed to avoid the actual work in the overlap rate
trigger mode, which exceeds the limit of the camera's fastest capture rate.
Once exceeded, the user can use the method of increasing flight altitude, or
reducing flight speed, or reducing overlap rate.
MS600V2 Universal Multi-Spectral
Camera User's Manual
Attention
11