Preview Page - Foxtech SurePulse VS User Manual

The third party compass should be used to check after calibration.It
can be confirmed by comparing the angle in the "Flight Direction"
column on the homepage. The corresponding true north direction should
not exceed ±10°. If the error exceeds this value, it is recommended
to recalibrate.
During geomagnetic calibration, poweroff are prohibited.

Factory Reset
Click on the recovery factory settings button, restart the camera,
automatic capture mode, image storage format, channel strobe can be
restored to the factory default state, the data in Micro SD card is
not affected.

3.4 Preview page

The preview page provides an image refreshed in approximately real-
time. This page mainly assists the gray board calibration work
before flight, and can also judge the current imaging angle and
effect of the camera.
The relationship between the image of the preview page and the
corresponding channel on the camera is shown below:
MS600V2 Universal Multi-Spectral
Camera User's Manual
Attention
17