APRILIA RS4 50 Manual page 46

Table of Contents

Advertisement

LOWER LUG REMOVAL
Rest the vehicle on its stand.
Remove the fairing.
Remove the rivet (11).
Loosen and remove screw (12).
Undo and remove the two
screws (13).
If it is necessary to remove the right semi-
lug:
02_30
slide off the component down-
wards.
If it is necessary to remove the left semi-
lug:
slide off the component down-
wards until it can be placed on
the support surface of the vehi-
cle.
Following the described instruc-
tions, remove the vehicle from
the stand and move it back-
wards, until it exceeds the semi-
lug previously placed.
Place the vehicle on the stand,
following the procedure descri-
bed in the section devoted to
collect the left semi-lug previ-
ously removed.
46
neer ze uit de klemverbinding
(10) worden gehaald.
VERWIJDERING VAN DE ONDERSTE
PUNT
Plaats het voertuig op de stan-
daard.
Verwijder de bekleding.
Verwijder de klinknagel (11).
Draai de bout los (12) en verwij-
der ze.
Draai de twee bouten (13) los en
verwijder ze.
In geval van de verwijdering van de rech-
ter halfpunt:
verwijder het onderdeel langs
onder.
In geval van de verwijdering van de linker
halfpunt:
verwijder het onderdeel langs
onder tot het op het steunopper-
vlak van het voertuig steunt.
Volg de aanduidingen om het
voertuig van de standaard te ha-
len, en verplaats het naar voor
tot de eerder gesteunde half-
punt wordt overschreden.
Positioneer het voertuig op de
standaard volgens de procedu-
re die wordt beschreven in het
betreffende deel, en recupereer
de halfpunt die eerder werd ver-
wijderd.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents