User Level; Temperature; Readings; Settings - Swegon COMPACT Air Operation And Maintenance Instructions

7

USER LEVEL

7.1 Temperature

The basic functions can be preset at INSTALLATION LEV-
EL and the values can be read and set at USER LEVEL.
See also Section 9.2 in which the functions for
temperature are described in detail.
IMPORTANT! If you intend to substantially alter the tempera-
ture settings, you should first stop the air handling unit before
doing so.

7.1.1 Readings

Used for checking the performance.

7.1.2 Settings

ERS REGULATION 1
The control unit regulates the relationship between the sup-
ply air and the extract air temperatures according to a factory
preset curve.
Settings (see the chart to the right as well):
Value
Step
EA/SA Differential
Breakpoint (refers to
extract air temperature)
*) The setting range can be changed. See Section 14.3, Min./
Max. Setting.
ERS REGULATION 2
The control unit regulates the relationship between the supply
air and extract air temperatures according to a custom-plotted
curve. The curve has three adjustable breakpoints.
Settings (see the chart to the right as well):
Value
Extract air temperature
X1
X2
X3
Supply air temperature
Y1
Y2
Y3
Registered design. The company reserves the right to make design changes without prior notice.
Setting Factory
range settings
1 - 3 1
1-5 °C* 2 °C
15-23 °C* 20 °C
Setting Factory
range settings
10-40 °C 15 °C
10-40 °C 20 °C
10-40 °C 22 °C
10-40 °C 20 °C
10-40 °C 18 °C
10-40 °C 14 °C
TEMPERATURE
*TEMPERATURE*
READINGS
SETTINGS
*TEMPERATURE*
READINGS
SETTINGS
ERS REGULATION 1
ERS REGULATION 2
ERS Regulation 1
24
23
22
21
20
19
18
17
16
15
14
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Extract air temperature °C
ERS Regulation 2
22
1
20
15
10
9
12 15
X = Extract air temperature °C
GB.COMPACTAHSK.210520
Important! The
appearance of the menus
varies depending on the
type of air handling unit
and functions selected.
2
3
20 25
www.swegon.com
27
13