1:1 Communication With Programmable Displays Of Gt Series - Panasonic FPS Series User Manual

Communication
•
Using the 2-channel RS232C type communication cassette (FPG-COM2):
CD
1
RXD 2
TXD
3
DTR 4
GND
5
DSR
6
RTS
7
CTS
8
RI 9
Left: computer, right: FPΣ
To second external device
1
•
Using the 1-channel RS485 and 1-channel RS232C combination type communication
cassette (FPG-COM4):
CD
1
RXD
2
TXD
3
DTR 4
GND
5
DSR 6
RTS
7
CTS 8
RI
9
Left: computer, right: FPΣ

8.5.5.2 1:1 Communication with Programmable Displays of GT Series

For a 1:1 MEWTOCOL-COM connection between the FPΣ and a programmable display of the
GT Series, an RS232C cable is needed. Communication is performed via commands from the
programmable display and responses from the PLC.
No program is required for communication. Simply set the mutual communication settings to
operate the PLC via the programmable display.
It is recommended to connect the computer to the TOOL port of the FPΣ. A connection cable
(order no. AFC8513D) with a 5-pin mini-DIN connector and a 9-pin Sub-D connector is
available.
180
S1
R1
S2
R2
SG
+
-
SD
RD
SG
FPΣ User's Manual