Connecting / Setting Procedures; When Using With Light Curtain Sf4B / Sf4B<V2> Series Only - Panasonic SFB-HC Instruction Manual

Connecting / Setting Procedures

2-3 Connecting / Setting Procedures
This section describes the connecting / setting procedures for both this device and SF4B /
SF4B<V2> series or SF-C14EX.
2-3-1 When Using with Light Curtain SF4B / SF4B<V2> Series Only
<When using the 8-core cable>
1. Set the SF4B / SF4B<V2> series, and
check that the SF4B / SF4B<V2> series
works properly. For mounting method of
SF4B / SF4B<V2> series, refer to the re-
spective Instruction Manuals.
SF4B / SF4B<V2>
series
To power supply
3. Turn ON the power, and set the function with this device.
After the power of this device is ON, approx. 30 sec. will be taken for data transmission with SF4B
/ SF4B<V2> series. While data transmission, "
The control output (OSSD 1 / 2) of SF4B / SF4B<V2> series is set to "OFF" while this device
has been connected.
REFERENCE
4. Turn OFF the power, then remove this device.
5. Connect both SF4B / SF4B<V2> series and the extension cable with connectors and return the
device to the state described in procedure 1.
6. Check that the SF4B / SF4B<V2> series works as set at the procedure 3.
Then, inspect the SF4B / SF4B<V2> series.
REFERENCE
7
Bottom cap
cable
Extension cable
with connectors
Refer to "3-1 Functional Descriptions <When Using with Light Curtain SF4B /
SF4B<V2> Series Only>" for the details of the functions, and refer to "3-3 Function Set-
ting (Operation Procedure)" for the setting procedures of the functions respectively.
Refer to "Chapter 4 Maintenance" of the SF4B / SF4B<V2> series instruction manual for
the details of the inspection of the SF4B / SF4B<V2> series.
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
2. Turn OFF the power, and disconnect the ex-
tension cable with connectors connected to
SF4B / SF4B<V2> series, and then connect
this device between SF4B / SF4B<V2> se-
ries (emitter or receiver) and the extension
cable with connectors.
SF4B / SF4B<V2> series
(Emitter or receiver)
Bottom cap
cable
FU
NC
TI ON
CA NC
EL
EN
TE
R
This device
" lights up in revolving.
Extension cable
with connectors
To power supply