Ce Marking; Ul And Csa Certified - Bosch Rexroth VAM 10.2 Project Planning Manual

20/69 Bosch Rexroth AG
Technical data
5.7.2

CE marking

Declaration of conformity
5.7.3

UL and CSA certified

Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
Standard Significance
EN 60721-3-2 Classification of ambient conditions
EN 60721-3-1 Classification of ambient conditions
DIN EN 61 131-2 Programmable logic controllers
Equipment and tests requirements
UL 508 Industrial Control Equipment
Tab. 5-11: Standards used
The electronic products described in this project planning manual comply with
the requirements and goals of the following EU directives and with the
harmonized European standards:
EMC Directive 2004/108/EC
The electronic products described in this project planning manual are inten‐
ded for the in industrial environments and comply with the following require‐
ments:
Standard Title
DIN EN 61000-6-4 Electromagnetic compatibility (EMC)
(VDE 0839-6-4) Part: 6-4: Generic standards – Emission standard
for industrial environments (IEC 61000-6-4:2006)
DIN EN 61000-6-2 Electromagnetic compatibility (EMC)
(VDE 0839-6-2) Part: 6-2: Generic standards – Noise immunity for
industrial environments (IEC 61000-6-2:2005)
Tab. 5-12: Standards for electromagnetic compatibility (EMC)
The devices of the VAM 10.2/VAM 40.2 product family are certificated ac‐
cording to
● UL508 (Industrial Control Equipment) and
● C22.2 no. 142-M1987 (CSA)
UL file no. E210730
However, there can be combinations or stages of expansions with limited or
missing certification. Therefore verify the certification by using the UL label on
the device.
To guarantee an UL- and CSA-compliant operation, the following
conditions have to be fulfilled:
● Use only insulated copper wire suitable for at least 60/75 °C.
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Edition
September
2007
March
2006