Terms And Abbreviations; Customer Feedback - Bosch Rexroth VAM 10.2 Project Planning Manual

6/69 Bosch Rexroth AG
About this documentation
1.5

Terms and abbreviations

1.6

Customer feedback

Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
For the available interface, refer to
For the commissioning of the machine control panels, refer to
"Commissioning" on page
For information on the device disposal, refer to
page 57.
For the type codes of the devices and specifications on the plugs and cables
available as accessories, refer to
59.
For information on the customer service help desk of Bosch Rexroth, refer to
chapter 12 "Service and support" on page
Term Explanation
CE The CE marking (Conformité Européenne) is used by the manufac‐
turer or EU importer according to the EU regulation 765/2008 and
"indicates that the product is in conformity with the applicable re‐
quirements set out in Community harmonization legislation provid‐
ing for its affixing"
UL Underwriters Laboratories Inc., US organization to certify electro‐
technical products
CSA Canadian Standards Association. The CSA develops and main‐
tains more than 3000 standards and directives with regard to safe‐
ty, design and performance.
NEMA National Electrical Manufacturers. "National Electrical Manufactur‐
ers Association" of the electrotechnical industry of North America
Tab. 1-1: Terms and abbreviations
Customer requests, comments or suggestions for improvement are of great
importance to us. Please email your feedback on the documentations to
Feedback.Documentation@boschrexroth.de. Directly insert comments in the
electronic PDF document and send the PDF file to Bosch Rexroth.
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
chapter 8 "Interfaces" on page
47.
chapter 10 "Disposal" on
chapter 11 "Ordering information" on page
63.
37.
chapter 9