Ce Marking; Declaration Of Conformity - Bosch Rexroth IndraControl VAM 11.1 Project Planning Manual

30/83 Bosch Rexroth AG
Technical Data
EMERGENCY STOP button -
standards
4.7.2

CE Marking

Declaration of Conformity

Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
Standard Meaning
EN 60950 Clearances and creepage distances office (environment)
and power units
ISO 13850 Safety of machinery, emergency stop principles for design
EN 60 529 Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6 Vibration test
EN 60068-2-27 Shock test
EN 60721-3-3 Classification of ambient conditions
EN 60721-3-2 Classification of ambient conditions
EN 60721-3-1 Classification of ambient conditions
DIN EN 61 131-2 Programmable logic controllers
Equipment and tests requirements
UL 508 Industrial Control Equipment
Fig.4-14: Used standards
The EMERGENCY STOP button is disclosed by the manufacturer as safety
component according to machinery directive 2006/42/EC (annex V-10, emer‐
gency stop devices). The compliance with the directive is proven by adherence
to the following European standards:
● IEC 60204-1 (safety of machinery – electrical equipment of machines)
● ISO 13850 (safety of machinery - emergency stop - principles for design)
The electronic products described in this project planning manual comply with
the requirements and goals of the following EU directives and with the harmon‐
ized European standards:
EMC Directive 2004/108/EC
The electronic products described in this project planning manual are intended
for the use in industrial environments and comply with the following require‐
ments:
Standard Title
DIN EN Electromagnetic compatibility (EMC)
61000-6-4
Volume: 6-4: Generic standards – emission stand‐
(VDE 0839-6-4) ard for industrial environments (IEC
61000-6-4:2006)
DIN EN Electromagnetic compatibility (EMC)
61000-6-2
Volume: 6-2: Generic standards – noise immunity
(VDE 0839-6-2) for industrial environments (IEC 61000-6-2:2005)
DIN EN 50178 Electronic equipment for use in power installations
(limited to overvoltage category II)
Fig.4-15: Electromagnetic compatibility (EMC) standards
DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Edition
September
2007
March 2006
1998-14