Cell Lock; Settings; Profiles - MALUX SED OPH-810R User Manual

SED OPH-810R
You can enter ARFCN of target cell in this
menu. Press OK to enable the forcing mode.
Note: If the forcing ARFCN is not a BCCH
ARFCN, your handset will lose service. In
Dedicate mode, the forcing ARFCN shall be
one of the six strongest neighbor cells that
BSICs have been decoded. The success of
handover finally depends on the network.

Cell lock

You can use this function to lock the current
serving cell, it will deactivate cell reselection
and handover. An icon will be prompted in
status bar. You can also select Cell Lock and
press OK key to switch between forcing mode
and non-forcing mode.
Note: The priority of Cell forcing is higher than
Cell lock. Cell lock and Cell forcing cannot
be used simultaneously.
- 60 -
User Manual

Settings

You can set your handheld to make it unique.
Choose Menu > Settings or press a shortcut
key in standby mode to access the Settings
menu.

Profiles

You can choose any one of five profiles:
General, Meeting, Outdoor, Indoor, and
Headphone. When you connect a headphone
to your handheld, the headphone profile is
automatically activated. You can use the
same method to set the volume, alert mode,
power-on music, and power-off music. After
selecting a profile, press the OK key to
display the following operation options:
1 Active: Activates the current profile.
2 Volume: Adjusts the volume of this profile.
After selecting this option, press direction
keys to adjust the volume, and then press the
OK key to confirm or press the C key to
cancel the adjustment operation.
www.malux.se