Setting The Duration Of A Loop Current Interruption (Flash Time); Activating/Deactivating The Change Lock; Setting The Pin Number - MALUX ResistTel MB Operating Instructions Manual

Configuration
Setting the duration of a loop current interruption (flash time) when
pushing the second call button ®
+ { Flash time }
Flash time:= |
80 ms
120 ms
600 ms
Factory setting: 2

Activating/deactivating the change lock

+ PIN { change lock }
Change lock:=
Change lock deactivated, all settings can be modified
Change lock activated, settings are locked
Factory setting: 0

Setting the PIN number

+ PIN { new PIN } { new PIN }
PIN:=
New PIN:= |
Factory setting:
PIN length:
If you modify the PIN number, be careful not to forget the PIN you
have set. Forgetting the PIN number is similar to losing a key. If
you forgot the PIN number, please contact our technical support
service.
Technical support service in Germany, Mülheim an der Ruhr:
Phone number
Fax
E-mail
Please use the country code if calling from outside Germany:
Phone number
Fax
+
|
|
| | | | | |
0000
always 4 digits
0208 82 68 0
0208 82 68 286
info@fhf.de
+49 208 82 68 0
+49 208 82 68286
www.malux.se
+
+
| | | |
19