Working Alone; Cell Forcing - MALUX SED OPH-810R User Manual

SED OPH-810R
will display "No Devices" if no Bluetooth
device has been found. After finding the
devices, select one and press OK key. "Set
Success" is prompted if the connection is
successful, otherwise prompt "Fail" . The
status bar displays
device is connected successfully.
5 Bluetooth List: A Bluetooth device will be
in the list once it has been discovered and
connected ever. You can press OK key to
view the Bluetooth devices list.
displayed in front of the connected device.
Select a Bluetooth device, press OK to view
the following options:
1) Connect: Connecting Bluetooth
device
2) Pair: Pairing with Bluetooth device
3) Delete: Delete device
4) Rename: Rename device

Working Alone

Working alone alarm might start in the following
User Manual
after the Bluetooth
will be
www.malux.se
conditions:
1. "No Motion Alarm" mode : The handset
remains stationary without any operation on it
in a preset time;
"Tilt Alarm" mode : The handheld tilts over
the set angle threshold without any operation
on it in a preset time;
Note: default set is "No Motion Alarm" mode.
2. Working alone alarm key has been pressed
and held by the users.
ON/OFF: You can use this menu to open or
close the working alone function, this option is
set to OFF by default. An icon will be prompted
in the standby interface if open this function.

Cell forcing

You can force the mobile to camp on a target
cell in idle or dedicated mode, it will force
handover in dedicate mode. An icon will be
prompted in status bar. Select Cell Forcing
and press OK to enter the setting screen.
- 59 -